Ayon S-10 MK II


Bilderesultat for tidal logo


Bilderesultat for roon logo

Varenummer: I/A Kategori:


Features & Design

Full-featured Network Music Player with DAC
Class-A triode vacuum-tube output stage for single-ended & balanced operation

Signal Path

We believe that the simplest circuits work best together with the shortest signal path. That is why our pre-amplifiers to date have used single-ended pure class-A circuitry. The shorter the signal path is, the less possibility of sonic degradation from various sources, including the wire itself. Even on the circuit boards, the copper traces are kept to a very minimum length. The completely redesigned circuit board provides a more straightforward and direct approach to the signal paths.

[toggle title_open=”Funksjoner:” title_closed=”Funksjoner:” hide=”yes” border=”yes” style=”default” excerpt_length=”0″ read_more_text=”Read More” read_less_text=”Read Less” include_excerpt_html=”no”]


• User interface on QVGA 5” TFT display • Internet radio (vTuner)
• Tidal
• RoonReady

• UPnP streaming from NAS or PC
• Streaming audio from USB HS (mass storage device)
° DSD – up to 256x
° WAV – up to 384kHz/24bit
° FLAC – up to 384kHz/24bit
° AIFF- up to 384kHz/24bit
● Digital input – S/PDIF (RCA), Toslink and USB “B” ( PCM & DSD ) for computer playback
● 2xUSB“A”inputs
● Digital output – S/PDIF (RCA)
● Analog line inputs: 2 pair RCA (optional)
● Electrical -analogue volume control for preamp (optional)
● PCM → DSD converter (up to 256x switchable) for all PCM signals ( optional)
● Logical sequenced soft-start power up for extended tube life
● Warm up function
● 0dB negative feedback (of any kind )
● Ultra short signal path
● Simplest direct circuit path for purest musical sound and high reliability
● Low output impedance for driving long runs interconnect to an amplifier, and any tube or solid state

power amp
● No solid state devices in the analog tube output (signal path )

● Minimal discrete wiring for optimum signal propagation ● No followers or buffers in the signal path
● No DC servo that degrades the signal
● High quality parts throughout

● Separate analog output stage for left and right channel ● Ethernet ( RJ45 )

Power Supply

The power supplies have been further refined with new components and enhanced AC line noise filtration. Separate power transformer windings and filters provide total isolation between the input and output stage which makes this a pure power source and it is a critical attribute for a 6H30 output stage. We also use electrolytic capacitors with much larger storage capacity to make up for the loss in filtering when using resistors in lieu of inductors.

● R-Core / Low noise – insulated power transformer for digital & analog
● Innovative power supply provides a high speed energy delivery on transients ● Separate and isolated power supplies over each stage of amplification
● AC power line filter to avoid noise and hash from entering into the unit.
● 8 separate voltage regulators


The type of parts used therefore must have a synergistic relationship to the circuit they are placed in. It is this relationship of which type of part to use where, that ranks our products apart from the mass.

● Selected, premium quality passive components used in all applications ● High speed & high quality audiophile grade coupling capacitors
● High quality tube sockets with gold pins
● Capacitors ( MKP 2% )

● High quality – RCA & XLR jack
● Gold-plated industrial grade PCB






[toggle title_open=”Spesifikasjoner:” title_closed=”Spesifikasjoner: ” hide=”yes” border=”yes” style=”default” excerpt_length=”0″ read_more_text=”Read More” read_less_text=”Read Less” include_excerpt_html=”no”]

Ayon S-10

Conversion rate

384kHz / 24 bit & DSD64/128/256

PCM → DSD converter

All PCM signals → DSD128 or 256 switchable

Dynamic range

> 120dB

Channel separation

>105dB 20 Hz to 20 kHz

Output level @1 kHz / 0,775V -0dB /RCA/XLR

0 – 8V rms variable

Output impedance Single-Ended-RCA

~ 700 Ω

Output impedance Single-Ended-XLR

~ 700 Ω

Digital inputs

75 Ω S/PDIF (RCA & up to 24/192kHz), TosLink (up to 24/192kHz)
USB up to 192KHz and DSD64/128 Front mounted USB type ‘A’ socket for USB “pen”/hard disk drive
Rear mounted USB type ‘A’ socket for USB “pen”/hard disk drive

Network inputs

RP-SMA plug Wifi Aerial input (“wireless” network connection) 802.11b/g
UTP RJ45 10/100Mbps socket (“wired” network connection)

S/N ratio

> 115 dB

Frequency response

20Hz – 20kHz +/- 0.3dB

Total harmonic distortion @ 1kHz

< 0.002%

Remote control


Analog line inputs

2 pair RCA

Analog – Main outputs

1 pair RCA & XLR

Dimension (Wide x Deep – incl. terminals x High – incl. feet) cm

48 x 36 x 12 cm

Weight, unit only

12 kg[/toggle]