Micromega M-One

49.990kr61.990kr

Nullstill
Varenummer: I/A Kategori:

Beskrivelse

M-ONE kommer i 2 utgaver med henholdsvis 100 eller 150 watts effekt. De er ytelsesmessig lik i funksjoner og DAC-del, men forskjellig på effekt.

M-150 har en mer sofistikert effektdel med det doble antallet komponenter i audio-delen, samt Micromegas effektkorreksjonsystem (PCF).

M-150 kan da drive de fleste høyttalere man skulle kunne tenke seg i denne prisklassen og dobler effekten pent ved 4ohm.

 

Selve effektforsterkeren som er dual mono er analog med et svært musikalsk A/B push pull utgangstrinn. Strømforsyningene er basert på LLC prinsippet for å hindre intermodulasjon. Disse klokker skyhøyt og langt ut av audiodomenet og Micromega bruker også 2 stykker for å hindre interferens mellom de forskjellige delene av forsterkeren. I tillegg hjelper LLC-prinsippet med å lade kondesatorene lynraskt for kjapp og presis lyd. M-ONE har oppnådd svært gode resultater i labtest og man hører at man har alle de kreftene man er lovet på papiret!

Stabilitet helt ned til 1ohm, da med 690 watt sier litt!

 

Klasse D-forsterkning som ofte velges i slike kompakte amper er valgt bort da dette byr på en rekke utfordringer A/B push-pull løser mye bedre.
Det helstøpte aluminiumschassiset gir et lekkert ytre og skjuler også kablene godt for dem som er opptatt av å holde interiøret rent.

 

Micromega-M-One

Since your listening room is the weakest link in your installation, our engineers designed the M.A.R.S
system to address this issue.

This acoustic correction system and its Room EQ program detect the sound irregularities of your room and attenuate them for a balanced and accurate response. Over time, the dedicated application will provide this scalable system with a variety of additional features.

 

Included with M-150, in option with M-100

 

 

M.A.R.S.

Micromega  Acoustic Room System

The electro-acoustic correction system M.A.R.S. corrects any faults in your audio system by taking measurements from a microphone placed at the listening point.

This correction system takes into account your whole system: “speakers – room.” It irons out any incidents in the amplitude/frequency response co- ming from re ections, absorptions or resonances in the listening room. It also corrects imperfections in the speakers.

The sound is transformed, any unpleasant resonance and other acoustic problems caused by your stereo are eliminated. The sound has pinpoint accuracy and the base register has more impact. You can be sure you are getting the best out of your system whilst still preserving the necessary neutrality of true hi-fidelity.

Les M.A.R.S. Manualen her! 

Spesifikasoner M-100

Amplifier size

Width : 430 mm
Depth : 350 mm
Height (with spikes) : 56 mm

 

Packaging (box)

Width : 685 mm

Depth : 542 mm

Height : 85 mm

 

Amplifier weight

Net weight : 9 kg

Gross weight : 10,7 kg

 

Packaging (overbox)

Width : 735 mm

Depth : 600 mm

Height : 150 mm

 

Power Consumption

Standby : 2 channels – 1/8 Pmax :

 

Rated output power

PRMS under 8 Ohms : 2*100W

PRMS under 4 Ohms : 2*200W

 

Signal to noise ratio

Digital input : 106 dB(A)

Balanced analog input : 103 dB(A)

Unbalanced analog input : 100 dB(A)

Phono MM input : Sup. 75 dB(A)

 

Speaker output residual noise, open input

8 Ohms : under 160 μV

4 Ohms : under 200 μV

 

Output impedance @250Hz under 8 Ohms

Damping factor : Sup. 500

 

Total harmony distortion

THD, 8 Ohms, 63 Hz : under 0,001%

THD, 8 Ohms, 1 kHz : under 0,005%

THD, 8 Ohms, 10 kHz : under 0,05%

 

THD, 4 Ohms, 63 Hz : under 0,001%

THD, 4 Ohms, 1 kHz : under 0,01%

THD, 4 Ohms, 10 kHz : under 0,07%

 

Intermodulation distortion – SMPTE

IMD, from 1W to PNOM, 8 Ohms : under 0,01%

IMD, from 1W to PNOM, 4 Ohms : under 0,02%

 

Intermodulation distortion – Dynamic

DIM 30, 50W, 8 Ohms : under 0,02%

DIM 30, 100W, 4 Ohms : under 0,05%

 

Channels separation

Crosstalk, 1kHz : under 96dB

Crosstalk, 10kHz : under 80dB

 

Analog input sensitivity

Phono MM, 47 kOhms :  12 mVRMS

Phono MC, 110 Ohms :  1,2 mVRMS

Analog :  1,4 VRMS

Balanced :  1,7 VRMS

 

Sub-Out output

Cut-off frequency :  400 Hz

Spesifikasjoner M-150

Amplifier size

Width : 430 mm
Depth : 350 mm
Height (with spikes) : 56 mm

 

Packaging (box)

Width : 685 mm

Depth : 542 mm

Height : 85 mm

 

Amplifier weight

Net weight : 9 kg

Gross weight : 10,7 kg

 

Packaging (overbox)

Width : 735 mm

Depth : 600 mm

Height : 150 mm

 

Power Consumption

Standby : 2 channels – 1/8 Pmax :

 

Rated output power

PRMS under 8 Ohms : 2*150W

PRMS under 4 Ohms : 2*300W

 

Signal to noise ratio

Digital input : 106 dB(A)

Balanced analog input : 103 dB(A)

Unbalanced analog input : 100 dB(A)

Phono MM input : Sup. 75 dB(A)

 

Speaker output residual noise, open input

8 Ohms : under 160 μV

4 Ohms : under 200 μV

 

Output impedance @250Hz under 8 Ohms

Damping factor : Sup. 500

 

Total harmony distortion

THD, 8 Ohms, 63 Hz : under 0,001%

THD, 8 Ohms, 1 kHz : under 0,005%

THD, 8 Ohms, 10 kHz : under 0,05%

 

THD, 4 Ohms, 63 Hz : under 0,001%

THD, 4 Ohms, 1 kHz : under 0,01%

THD, 4 Ohms, 10 kHz : under 0,07%

 

Intermodulation distortion – SMPTE

IMD, from 1W to PNOM, 8 Ohms : under 0,01%

IMD, from 1W to PNOM, 4 Ohms : under 0,02%

 

Intermodulation distortion – Dynamic

DIM 30, 50W, 8 Ohms : under 0,02%

DIM 30, 100W, 4 Ohms : under 0,05%

 

Channels separation

Crosstalk, 1kHz : under 96dB

Crosstalk, 10kHz : under 80dB

 

Analog input sensitivity

Phono MM, 47 kOhms :  12 mVRMS

Phono MC, 110 Ohms :  1,2 mVRMS

Analog :  1,4 VRMS

Balanced :  1,7 VRMS

 

Sub-Out output

Cut-off frequency :  400 Hz

Tester

M150: HiFi News