Parasound ZoneMaster 1250

26.990kr

Parasound ZoneMaster 1250 er en meget fleksibel og kraftig 12-kanals multikanalsforsterker med 50w pr kanal – Alle utganger i drift. Alle utganger kan settes i Bridge-mode for mer krefter. Tåler ned til 2Ohms motstand. 2U rack-ører medfølger

Beskrivelse

Parasound ZoneMaster 1250

  • Our new ZoneMaster models are very similar in their feature sets, differing mainly in size and number of channels.
  • Universal amplifier for applications from 50 to 200 watts
  • 24 speaker connections (A and B outputs for all 12 channels)
  • High current for stable operation at 2 Ohms
  • Channel pairs are bridgeable for up to 200 watts @ 4 Ohms
  • Class AB input stage plus premium Class D power stage
  • Independent audio sensing triggers, one for each zone
  • 6 Independent 12 volt trigger inputs, one for each zone
  • Looping 12 volt trigger outputs for each zone
  • Master 12 volt trigger input to turn all zones on-off
  • Speaker level input for expanding systems w/out pre out jacks
  • Two bus inputs can be routed to any zone
  • Bus loop output jacks for passing audio to another amp
  • Mono mode combines L and R for single speaker applications
  • Separate level controls for all twelve channels
  • Detachable speaker connectors accept up to 12 gauge wire
  • Short circuit and overheat protection with front panel indicators
  • 0.5 watt standby power consumption meets Energy Star & EU specs
  • Compact 2U chassis
  • 2U rack mounting hardware is included in box

Spesifikasjoner

Power Output:
RMS, All Channels Driven (20 Hz – 20 kHz)
50 watts x 12 @ 8Ω
90 watts x 12 @ 4Ω or 2Ω
160 watts x 6 @ 8Ω (Bridged)
200 watts x 6 @ 4Ω (Bridged)
Frequency Response:
10 Hz – 60 kHz, +0/-3 dB Total Harmonic Distortion
< 0.05% at typical listening levels
< 1.0% at full power
Interchannel Crosstalk:
70 dB at 20 kHz
Input Sensitivity:
700mv = Full output (50 Watts @ 8 Ω)
Total Gain = 29 dB (Level controls set to Maximum) S/N Ratio
> 112 dB, input shorted, IHF A-weighted DC Trigger Requirements
+9 Vdc to +12 Vdc, 2 mA Audio Trigger Requirements
2 mV Audio Signal
Dimensions:
Width: 17.25″ (437 mm)
Depth: 14.5″ (369 mm)
Height, with feet: 4.25″ (108 mm)
Height, without feet: 3.5″ (89 mm) Weight:
Net: 17 lbs (7.7kg)
Shipping: 23 lbs (10.4kg)