Schiit Freya



Balansert forforsterker som kan brukes både aktivt og passivt. Med fjernkontroll.

Tomt på lager!

Tomt på lager



It’s Your Choice: Passive, JFET Buffer, or Tube Gain

Go ahead. Run Freya in passive mode for a convenient remote-controlled passive preamp that’s ideal for many systems. If you need to drive long cables, you can simply select the JFET buffer stage, or choose the tube gain stage—a serious gain stage running on 300V rails.


128-Step Relay Attenuator

Most preamps—passive or active—use a potentiometer for volume control. Freya uses a sophisticated microprocessor-controlled relay-stepped attenuator for perfect channel matching and zero distortion—and with 128 steps for ultra-precise level control. You can hear it clicking as you turn the volume up and down.


Yes, Remote Control Included

When you’re talking about gear that doesn’t sit on your desktop (like our headphone amps), you need the convenience of remote control for volume, input switching, output switching, and muting. Freya includes a custom remote control, standard.


Perfect Companion to Our DACs

Want a remote-controlled system to interface your digital gear with the rest of your system? Stack Freya and Gungnir Multibit or Freya and Yggdrasil (or any other of our DACs) for a true no-compromise remote-controlled system.


Made in USA. Really.

By “made in USA,” we mean made in USA. The vast majority of the total production cost of Freya—chassis, boards, assembly, etc—goes to US companies manufacturing in the US.


JFET Buffer
Gain: 1
Frequency Response: 20Hz-20Khz, -0.2db, 3Hz-500KHz, -3dB
THD: <0.001%, 20Hz-20KHz, at 2V RMS
IMD: <0.0015%, CCIR
SNR: >110db, A-weighted, referenced to 1V RMS
Output Impedance: 75 ohms SE, 600 ohms balanced
Topology: Single pair JFET per phase with passive distortion cancellation, DC coupled

Tube Gain
Gain: 5 (14dB)
Frequency Response: 20Hz-20Khz, -0.2db, 3Hz-200KHz, -3dB
THD: <0.01%, 20Hz-20KHz, at 2V RMS
IMD: <0.01%, CCIR
SNR: >95db, A-weighted, referenced to 1V RMS
Output Impedance: 210 ohms
Topology: differential input/output, pure triode, with low impedance followers
Crosstalk: >75dB, 20-20kHz
Inputs: 2 XLR pairs plus 3 RCA pairs, selectable via front switch or remote
Outputs: 1 XLR pair plus 2 RCA pairs, selectable via front switch or remote
Volume Control: relay-switched stepped attenuator with discrete thin-film resistors, 128 0.625dB steps
Power Supply: One 48VA transformer with regulated 300V rail, plus 24VA transformer with regulated +/-20C rails, plus 6.3VAC tube heaters and regulated 5VDC for microprocessor
Power Consumption: 40W typical
Size: 16” x 8” x 2” + tube height (about 2.5″ more)
Weight: 11 lbs