Schiit Fulla 3

1.590kr

Fleksibilitet for Gaming og Muskk!
Fulla 3 kobles til USB-porten på PC/Mac.

Koble til strøm, koble til hodetelefoner og eventuelt en mikrofon– like perfekt for musikk-entusiasten som for gameren!

  • Bruk den som en fantastisk DAC/amp. Du trenger ikke være gamer for å verdsette kvalitetene til Fulla. Bruk nivå-bryteren på fremsiden til å tilpasse forsterkeren til ditt behov – om det er lettdrevne ørepropper eller tungdrevne hodetelefoner.
  • Bruk den som en DAC/forforsterker. Koble til aktive høyttalere og bruk den som en forforsterker via de variable utgangene på baksiden.
  • Bruk den som en forsterker. Koble til telefonen din (eller hvilken som helst analog kilde) til jack-inngangen på baksiden , og bytt inngang med vippebryteren på fremsiden.
  • Bruk den med telefoner, nettbrett eller datamaskiner. Fulla tilkobles og sees som en 0mA-enhet. Inkludert ekstra USB-kabel for tilkobling til strøm.
Tomt på lager!

Tomt på lager

 

Beskrivelse

Fulla 3 is pretty much the answer to the question, “What’s the most affordable way I can get into great sound for gaming…and music, too?” Because it’s a great DAC/amp with top-shelf components—that also has a very nice microphone input, too. Fulla 3 is ready for your headphones, your headphone mic, your powered monitors, your analog sources, and more.

Top-Shelf Components
Like DACs costing many times its price, Fulla 3 uses the AKM AK4490 D/A converter. Coupled with an Alps RK09 potentiometer, high-quality filter and amp stages from Texas Instruments, as well as precision thin-film resistors and film capacitors, Fulla delivers performance far beyond its modest price.
Plenty of Headphone Power
Fulla 3 delivers a super punch, up to 400mW into 16 ohms, together with a vanishingly low noise floor and low output impedance. Or, in English, this means it’s a great match for virtually any headphone.
Amazing Mic Input
Your friends may think you’ve started your own podcast when they hear Fulla 3’s 24-bit microphone input with AKM analog-to-digital converter. And, automatic gain control makes the mic adjustment-free and super simple to use.

Spesifikasjoner

Frequency Response: 20Hz-20Khz, +/-0.5db 

Maximum Power, 16 ohms: 400mW RMS
Maximum Power, 32 ohms: 250mW RMS
Maximum Power, 50 ohms: 200mW RMS
Maximum Power, 300 ohms: 40mW RMS
 
THD: <0.002%, 20Hz-20KHz, at 1V RMS
IMD: <0.002%, CCIR
SNR: >105db, A-weighted, referenced to 1V RMS
Crosstalk: >-80dB, 20Hz-20KHz
 
Output Impedance (headphones): 0.5 ohms
Output Impedance (line out): 75 ohms
Input Impedance (rear 1/8″ jack): 10k ohms
 
Gain: 1.7 (4.6db)
 
USB Receiver: C-Media CM6631A
DAC: AKM AK4490 with TI OPA1662-based filter stage
Sample Rates and Bit Depths: 16/44.1 to 24/192 supported without drivers on Windows 10, Mac, Linux, Android (UAC 2 device)
 
Output Stage: TI LMH6643 x 2 (1 per channel) 
 
Power Supply: Via USB, with +/- 5V rails via high-current dual-polarity switching regulator, with inductor filtering and local regulation
 
Power Consumption: 0.8W typical
 
Size: 3.5 x 2.5 x 1.375” (including knob)
Weight: 9 oz