Schiit HEL

2.890kr

Fleksibilitet for Gaming og Muskk!
HEL kobles til USB-porten på PC/Mac.
Koble til strøm via medfølgende USB-strømforsyning, koble til mikrofon og hodetelefoner – og så er alt klart for å starte å game!
Men det er bare begynnelsen:
  • Bruk den som en fantastisk DAC/amp. Du trenger ikke være gamer for å verdsette kvalitetene til HEL. Bruk nivå-bryteren på fremsiden til å tilpasse forsterkeren til ditt behov – om det er lettdrevne ørepropper eller tungdrevne hodetelefoner.
  • Bruk den som en DAC/forforsterker. Koble til aktive høyttalere og bruk den som en forforsterker via de variable utgangene på baksiden.
  • Bruk den som en forsterker. Koble til telefonen din (eller hvilken som helst analog kilde) til jack-inngangen på baksiden , og bytt inngang med vippebryteren på fremsiden.
  • Bruk den med telefoner, nettbrett eller datamaskiner. HEL tilkobles og sees som en 0mA-enhet. Inkludert 2,1mA USB Power Supply.
 

Beskrivelse

Schiit Hel – Next Level Gaming! 

If you want the ultimate in a transportable gaming DAC/amp, you’re looking at Hel. Yes, Hel. As in the Norse underworld. That’s why it’s black and red. Or something like that. In any case, Hel delivers like 40x the power of a typical computer headphone output, plus it has a podcast-quality stereo-compatible electret mic input. It’s also an amazing DAC/amp for music, and with a separate analog input, preamp output, and gain switch, it’s ready for all your desktop needs.

Power and Quality to Spare
Hel delivers a full 1000mW into 32 ohms—enough to light up any gaming headphone you throw at it, and tons of power for virtually every audiophile headphone, too. With an all-new, DC-coupled, high-current output stage with feedforward, its performance is far beyond any computer or phone. In addition, the microphone input uses a stereo 24-bit AKM ADC with front-panel gain control for highest possible quality.
Top-Shelf Components
Like DACs costing many times its price, Hel uses the AKM AK4490 D/A converter. Coupled with an Alps RK09 potentiometer, high-quality filter and amp stages from Texas Instruments, a sophisticated bipolar +/-12V supply, and precision thin-film resistors and film capacitors, Hel delivers amazing performance for its price.

Spesifikasjoner

Frequency Response: 20Hz-20Khz, +/-0.3db

Maximum Power, 16 Ohms: 1200mW RMS
Maximum Power, 32 ohms: 1000mW RMS
Maximum Power, 50 ohms: 650mW RMS
Maximum Power, 300 ohms: 200mW RMS
 
THD: <0.0015%, 20Hz-20KHz, at 1V RMS
IMD: <0.0015%, CCIR
SNR: >108db, A-weighted, referenced to 1V RMS
Crosstalk: >-80dB, 20Hz-20KHz
 
Output Impedance (headphones): 0.25 ohms
Output Impedance (line out): 75 ohms
Input Impedance (rear 1/8″ jack): 10k ohms
 
Gain: 1 (0dB) or 5 (14dB)
 
USB Receiver: C-Media CM6631A
DAC: AKM AK4490 with TI OPA1662-based filter stage
Sample Rates and Bit Depths: 16/44.1 to 24/192 supported without drivers on Windows 10, Mac, Linux, Android (UAC 2 device)
 
Output Stage: TI OPA1688 (4 amp stages per channel) 
 
Power Supply: Via USB, with +/- 12V rails via high-current dual-polarity switching regulator, with inductor filtering and local regulation
 
Power Consumption: 2.5W typical
 
Size: 5 x 3.5 x 1.375” (including knob)
Weight: 13oz