Schiit Magni 3

1.690kr

Schiit Magni 3+ eller Magni Heresy – hvilken velger du?

 

Nullstill
Varenummer: I/A Kategori:
 

Beskrivelse

Magni 3+ and Magni Heresy raise the bar even higher for affordable headphone amps, with by far the highest output power in their price class–at least 200% higher than any competitor. At the same time, they provide the cleanest measured performance of any Magni, ever. Go ahead. Compare these new Magnis to anything out there at the price, and we think you’ll agree: there’s really no competition.

Not Just a “Starter Amp”
Either Magni 3+ or Magni Heresy are all the amp you’ll ever need, for any headphone. They both have the power, performance, low noise, and versatility to meet all your needs. You’re set from IEMs to hard-to-drive planar designs. With a full 2400mW into 32 ohms, either Magni has tremendous power reserves. Combined with low distortion, an exceptionally low noise floor, and switchable gain, both Magnis perform far beyond their price.
Your Choice: High Performance…or Even Higher
For Magni 3+, we pulled out all the stops in designing the highest performing discrete Magni ever, by any metric—power, distortion, or noise floor. But it’s easy to get even higher measured performance from integrated (op amp) designs, so we decided to give you a choice, with Magni Heresy.
  • Choose Magni 3+ for the ultimate expression of an affordable all-discrete current-feedback headphone amp. It’s now seriously like a mini speaker amp, right down to the driver stage and Vbe multiplier. Magni 3+ is in our traditional silver and gray chassis.
  • Choose Magni Heresy for insanely great measurements from an all-op-amp based headphone amp that uses super high quality parts, including a multiple paralleled output stage with feedforward. Magni Heresy is in a black and red chassis.
Both amps sound fantastic. You really can’t make a wrong choice.
Versatility Comes Standard
Both Magnis include preamp outputs. This means you can connect either one to your desktop powered monitors for a complete system—or even connect it to a speaker power amp and use it as a preamp. With its built-in time-delayed start-up and instant shut-down, there’ll be no glitches or pops through either headphones or speakers, either.

Spesifikasjoner Magni 3+

Frequency Response: 20Hz-20Khz, +/-0.04dB
 
Maximum Power, 16 ohms: 2.8W RMS per channel
Maximum Power, 32 ohms: 2.4W RMS per channel
Maximum Power, 50 ohms: 1.6W RMS per channel
Maximum Power, 300 ohms: 410mW RMS per channel
Maximum Power, 600 ohms: 215mW RMS per channel
 
THD+N: 
High Gain: Less than 0.0013% (-98dB) at 1V RMS into 32 ohms
Low Gain: Less than 0.0005% (-106dB) at 1V RMS into 32 ohms
 
IMD: 
High Gain: Less than 0.01% (-80dB) at 1V RMS into 32 ohms, CCIF
Low Gain: Less than 0.002% (-95dB) at 1V RMS into 32 ohms, CCIF
 
SNR: 
High Gain: Greater than 104dB, A weighted, referenced to 1V RMS
Low Gain: Greater than 115dB, A weighted, referenced to 1V RMS
 
Crosstalk: Less than -70dB, 20 Hz-20 kHz in either gain
 
Output Impedance: Less than 0.2 ohms at either gain
Input Impedance: 25k ohms
 
Gain: 1 (0db) or 5.5 (15db), selectable via rear switch
Topology: Fully discrete, fully complementary all-bipolar, symmetrical current-feedback design with driver stage and Vbe multiplier, no capacitors in the signal path and DC servo
Protection: Standard failsafe DC power input and muting relay
 
Power Supply: “Wall wart” style 24VA 14VAC transformer, regulated +/- 16V rails with over 6,000uF filter capacitance
Power Consumption: 6W
 
Size: 5 x 3.5 x 1.25”
 
Weight: 1 lb

Spesifikasjoner Magni Heresy

Frequency Response: 20Hz-20Khz, +/-0.04dB
 
Maximum Power, 16 ohms: 2.8W RMS per channel
Maximum Power, 32 ohms: 2.4W RMS per channel
Maximum Power, 50 ohms: 1.6W RMS per channel
Maximum Power, 300 ohms: 410mW RMS per channel
Maximum Power, 600 ohms: 215mW RMS per channel
 
THD+N: 
High Gain: Less than 0.0014% (-97dB) at 1V RMS into 32 ohms
Low Gain: Less than 0.0002% (-113dB) at 1V RMS into 32 ohms
 
IMD: 
High Gain: Less than 0.002% (-95dB) at 1V RMS into 32 ohms, CCIF
Low Gain: Less than 0.0006% (-105dB) at 1V RMS into 32 ohms, CCIF
 
SNR: 
High Gain: Greater than 104dB, A weighted, referenced to 1V RMS
Low Gain: Greater than 115dB, A weighted, referenced to 1V RMS
 
Crosstalk: Less than -70dB, 20 Hz-20 kHz in either gain
 
Output Impedance: Less than 0.25 ohms at either gain
Input Impedance: 25k ohms
 
Gain: 1 (0db) or 5.5 (15db), selectable via rear switch
Topology: OPA1662 op-amp for voltage gain with local feedback, OPA1688 (8 stages) as output buffers with local loops, no overall loop feedback.
Protection: Standard failsafe DC power input and muting relay
 
Power Supply: “Wall wart” style 24VA 14VAC transformer, regulated +/- 16V rails with over 6,000uF filter capacitance
Power Consumption: 6W
 
Size: 5 x 3.5 x 1.25”
Weight: 1 lb